search
Price $
backpage.com > Tucson automotive > Tucson automotive services

Posted: Thursday, January 12, 2017 12:12 PM

I REGRIND KRANKSHAFTS DAY IN AND DAY OUT, THAT IS ALL I DO. I HAVE READY TO GO, TOYOTA 20, 22R OR 22RE KRANKSHAFTS, REGROUND ONLY TO .010" AND/OR .020" UNDER SIZE FROM THEIR OEM STANDARD SIZE WITH NO WELDED JOURNALS FOR JUST $100.00 EXCHANGE, OR I CAN AND WOULD BE HAPPY TO REGRIND YOUR KRANK .010" .010" FOR THE SAME COST (AMERICAN DOLLARS). MY KRANKS ARE REGROUND ROUND, HAVE NO TAPPERS OR HOUR GLASS AND THEY HAVE PERFECT RESIZING FROM JOURNAL TO JOURNAL. BE SURE TO REMOVE THE FOUR CONNECTION ROD JOURNAL OIL GALLEY PLUGS AND KEEP THEM. CALL ME FIRST, I WILL TELL YOU THE TRICK ON HOW TO REMOVE THEM OUT OF THE KRANK. USE AN 8MM ALLEN WRENCH TO TURN THEM. PUT THEM BACK IN AND STAKE THEM AFTER THE FINAL CLEAN. ALSO I HAVE BEARING KITS TO FIT THIS KRANK ALONG WITH STOCK ENGINE, TIMING, RE-RING, CAM, AND MASTERS KITS FOR REBUILDING THIS ENGINE. ALSO I SELL THE LOW END MID RANGE HIGH TORQUE OR TOP END HIGH PERFORMANCE CAMS THAT ARE AVAILABLE TOO FOR THIS ENGINE. THE EARLY 1981-1984 ENGINE KIT IS $200.00 AND THE LATE 1985-1995 ENGINE KIT IS $215.00. THIS TOYOTA ENGINE KIT INCLUDES TOP BRAND NAME PARTS THAT START WITH A STANDARD SIZE OR .020", .030" OR .040" OVER SIZE PISTONS AND RINGS. STANDARD SIZE OR UNDERSIZE .010", .020", .030" OR .040" MAIN AND ROD BEARINGS AND THE STANDARD THRUST BEARINGS INSERTS ALL IN ANY COMBINATION. ALONG WITH A BRAND NEW OIL PUMP, A FULL GASKET SET WITH THE REAR AND FRONT MAIN SEALS PLUS VALVE STEM SEALS PLUS A FREEZE PLUG SET. I ALSO SELL OVER 700+ OTHER DIFFERENT STOCK FOREIGN AND DOMESTIC ENGINE, BEARING, RE-RING, TIMING, MASTER AND CAM KITS ALONG WITH CUSTOM FORGED PISTON KITS AND STROKER KITS TOO. I SELL LOW END MID RANGE HIGH TORQUE OR TOP END HIGH PERFORMANCE CAMS AND CAM KITS TOO FOR ANY ENGINE MADE. MY PRICES CAN NOT BE BEAT AND MY 60,000 SQUARE FOOT WAREHOUSE IS RIGHT HERE IN TOWN. I HAVE TWO FRESH SHOP CORE KRANKSHAFTS THAT I WOULD LIKE TO SELL. NO CORES OR EXCHANGES NEEDED. THE FIRST ONE IS A FRESH .010" .020" REGROUND 231 BUICK/PONTIAC CASTING NUMBER 267, IT IS JUST $75.00. THE OTHER IS A FRESH .010" .010" LARGE JOURNAL small block CHEVY 327 CASTING NUMBER 3941174, IT IS $115.00. THIS 327 KRANK IS YOUR FOOT IN THE DOOR TO BUILD A CLOSE COPY OF A 375+ HORSEPOWER @ 6200 RPM L-84 KICK ASS small block. THIS ENGINE IS IN LINE WITH A 1963-1967 EARLY CORVETTE FACTORY HOT ROD JUST LIKE GM BUILT. YOU CAN USE ANY LARGE JOURNAL 2 PIECE REAR MAIN SEAL, 2 OR 4 BOLT MAIN CAP BLOCK AND YOUR IN LIKE FLINT. I CAN AND WILL HELP YOU GET THIS PROJECT ALL LAID OUT TO BUILD. BOTH THE CUSTOM PARTS KIT AT THE BEST PRICE YOU CAN GET AND RECOMMEND THE NEEDED MACHINE WORK TO DO THIS PROJECT RIGHT. SO WHAT ARE YOU WAITING FOR? JUST CALL LET'S TALK. YOU CAN ALSO USE THIS KRANK IN A PLAN JANE STOCK REBUILD AS A 307 OR STILL A 327 AND THEN PUT THIS ENGINE BACK IN YOUR C-10 PICK UP OR ANY OTHER CAR OR TRUCK THAT YOU DRIVE. THESE TWO KRANKS ARE READY TO GO OUT THE DOOR AND HAVE NO WELDED JOURNALS. BUY BOTH KRANKS FOR A REDUCED PRICE OF $175.00. I HAVE AT MY SHOP A CUSTOMER CONSIGNMENT KRANKSHAFT TOO. IT IS A BIG BLOCK FORD/LINCOLN THAT FITS A 383, 410 OR A 430 THAT IS FROM THE M.E.L. FAMILY OF FORD ENGINES. IT IS $65.00 OBO AND THEN IF YOU WANT I CAN REGRIND IT FOR YOU .010" .010". ALSO I SELL AT MY SHOP A BRAND NEW STILL IN THE FACTORY SEALED BOX, A 1250 RATED BIG RED ENGINE STAND WITH A 4 CAST IRON WHEEL STANCE, 80+ POUNDS OF A THICK HEAVY DUTY CONSTRUCTED STEEL FRAME, IT ROTATES 360 DEGREES AND HAS A TRICK TOOL TRAY ATTACHED TO THE BACK CENTER POST TO LAY TOOLS ON. THIS STAND WILL OR TIP OVER LIKE THE THREE WHEEL STANDS DO. IT IS JUST $88.00. I NOW HAVE AVAILABLE THE BIG RED 4000 POUND RATED CHERRY PICKER FOR JUST $230.00. THIS TWO TON ENGINE HOIST EVEN INCLUDES A $70.00 ENGINE LEVELING BAR WITH THE DEAL. THIS TOOL MAKES THE ENGINE R & R AS EASY AND FAST AS IT CAN BE. CALL ME AND MAKE SURE THE ONE AT THE WAREHOUSE IS STILL ON THE SHELF WITH YOUR NAME ON IT. THERE IS ONLY ONE AT A TIME AT THE WAREHOUSE. IF IS SOLD I WILL PUT YOUR NAME ON NEXT ONE THAT COMES IN ON THE WEEKLY STOCK ORDER. I WILL GET YOU LINED UP WITH THIS CHERRY DO NOT WORRY. ALSO I HAVE SOME USED MACHINE AND MISC ENGINE REBUILDING TOOLS FOR SELL AT MY SHOP. I DO NOT NEED OR USE THEM ANY LONGER. THE FIRST IS A TWENTY SIX INCH PRECISION STRAIGHT EDGE FOR CHECKING HEADS AND BLOCKS. THEN THERE ARE TWO ENGINE LIFTING PLATES AND A TON OF SHARP TAPS AND DIES, SOME ARE BRAND NEW. HOPE YOU CAN USE THESE TOOLS. JUST CALL LETS TALK, I WILL TELL YOU ALL THAT IS HERE TODAY AT MY SHOP. MY NUMBER IS 480 829 8313. THANKS.

1803 E. Rio Salado Pkwy #105, 85281    google map | yahoo map

• Location: Tempe, Tucson

• Post ID: 41638684 tucson
tucson.backpage.com is an interactive computer service that enables access by multiple users and should not be treated as the publisher or speaker of any information provided by another information content provider. © 2017 backpage.com